|
|
Design mechanism for raising the roof of a trailer
Štefek, Ondřej ; Zeizinger, Lukáš (referee) ; Foltýnová, Dana (advisor)
This bachelor's thesis deals with the design of a mechanism for lifting the roof of a flatbed trailer. Commercially available mechanical and hydraulic lifts are described in the introduction. In the next chapters, the design of mechanical and hydraulic lifts is discussed. For selected structural elements of mechanical lifting, a safety analysis is then performed with respect to the limit state of elasticity and ergonomic control. For hydraulic lifting, the safety of the cylinder rod for buckling is checked. The proposals are then financially calculated and compared with commercially available lifts. Drawing documentation is prepared for mechanical lifting.
|
|
|
Risk Analysis and Evaluation in a Transporting and Haulage Firm
Čegan, Tomáš ; Máša, Votěch (referee) ; Adamec, Vladimír (advisor)
This diploma thesis deals with an analysis and evaluation of risk in the freight transport company – Doprava Vícha s. r. o. The thesis describes the current situation in a freight transport industry, an applicable legislation, and risk analysis methods FMEA and WHAT-IF. Further the thesis analyses risks of a freight transportation and describes the company Doprava Vícha s. r. o. in detail. The thesis proposes a set of actions in order to minimize identified risks. The handbook with most important actions and advices for drivers is attached.
|
|
|
Výkony osobní a nákladní železniční dopravy v ČR a Evropě
Tsvirko, Oleksandr
The bachelor's thesis focuses on an analytical overview and modeling of the performance of passenger and freight railway transportation in the Czech Republic and selected European countries, with an emphasis on their economic aspects. The methodology includes the use of statistical and econometric procedures and methods. During the analysis using OLS models, hypotheses about the dependence of performance of railway transportation and economic indicators are verified. Through SARIMA models, the performances of passenger railway transportation are modeled. The results include recommendations for strategic decision-making and the optimization of railway transportation.
|
|
|
Analysis of national and international road transport in the Czech Republic
PROCHÁZKA, Michal
First part of this bachelor thesis covers a general concept of freight transport and describes gradual introduction of road freight transport. Attention in road freight transport is paid to the general characteristics of road freight transport and concepts of the road freight transport. Transport Policy of the European Union is subsequently presented and also related to the legislation of the Czech Republic's road freight transport. The last part describes trends which are currently being developed and shows examples of their use. Next part is already related to the practical part. This is an analysis of the national and the international freight transport in the Czech Republic until 2019. There is a comparison of national and international transports and analysis of them. The last two chapters deal with the coronavirus pandemic. This is a brief intoduction and a description of the measures that have been used to prevent the spread of the virus. These measures certainly had an impact on both national and international road freight transport. The results are evaluated by using graphs. The last chapter contains reflections on the whole situation and the ilustration of future developments of road freight transport. Part of this chapter is also semi-structurated interview with a representative of the transport company and a representative of the forwarding company who are directly affected by this situation.
|
|
|
Design mechanism for raising the roof of a trailer
Štefek, Ondřej ; Zeizinger, Lukáš (referee) ; Foltýnová, Dana (advisor)
This bachelor's thesis deals with the design of a mechanism for lifting the roof of a flatbed trailer. Commercially available mechanical and hydraulic lifts are described in the introduction. In the next chapters, the design of mechanical and hydraulic lifts is discussed. For selected structural elements of mechanical lifting, a safety analysis is then performed with respect to the limit state of elasticity and ergonomic control. For hydraulic lifting, the safety of the cylinder rod for buckling is checked. The proposals are then financially calculated and compared with commercially available lifts. Drawing documentation is prepared for mechanical lifting.
|
|
|
Freight transport in Czechia: analysis of the structure of performance and transport policy strategies
Štěpánek, Zdeněk ; Marada, Miroslav (advisor) ; Randák, Jakub (referee)
The first aim of this bachelor thesis is to determine and assess the meaningfulness of the current strategic documents of the Ministry of Transport, which address the change in current state of the domestic freight transport. The second aim is to identify those commodities which are transported by road and that could be in the future transported by an alternative way. At best, it should be ways which are less environmentally demanding and makes less load on the road. My own personal analysis of the current state of domestic and international transport in Czechia is used as a means to achieve these aims. Some of the strategic documents of Ministry of Transport contain beneficial development plans but on the contrary some of them are useless for the current situation. In Czechia there are freights for which it could be found more adequate ways of transport. In the international transport it can especially be recommended the use of combined transport as it is quite heterogeneous. KEY WORDS freight transport, railway transport, road transport, environment, development, Czechia
|
|
|
Risk Analysis and Evaluation in a Transporting and Haulage Firm
Čegan, Tomáš ; Máša, Votěch (referee) ; Adamec, Vladimír (advisor)
This diploma thesis deals with an analysis and evaluation of risk in the freight transport company – Doprava Vícha s. r. o. The thesis describes the current situation in a freight transport industry, an applicable legislation, and risk analysis methods FMEA and WHAT-IF. Further the thesis analyses risks of a freight transportation and describes the company Doprava Vícha s. r. o. in detail. The thesis proposes a set of actions in order to minimize identified risks. The handbook with most important actions and advices for drivers is attached.
|
|
|
The importance of inland waterway transport for European international trade focused on Port of Bratislava
Matúšová, Andrea ; Hinčica, Vít (advisor) ; Mervart, Michal (referee)
The thesis investigates the significance, development as well as the future prognoses of the European trade within the scope of inland waterway transport. The aim of the thesis is to describe the present condition of the European international inland waterways and their freight traffic efficiency. The practical part of the thesis is aimed at describing the actual state of Port of Bratislava including its historical meaning. This part of the thesis is targeted at the importance of the Port within the frame of the Rhine-Main-Danube waterway. The chapters involve the significance of the transloading of freight for Slovak exports and imports as well as the actual projects intended for the development of the port. The output of the thesis is the SWOT analysis of the Port of Bratislava, which is based on the gained knowledge and facts described in the thesis. The aim of the SWOT analysis is to evaluate the strengths, the weaknesses as well as the opportunities and the threats.
|
|
|
Intermodal transport systems and their spatial distribution in Europe
NEMEC, David
The main topic of the presented Bachelor Thesis is the description of systems of intermodal transport and the analysis of their distribution in Europe on the basis of factors of localization. In the theoretical part before the analysis itself, their general characteristic is described along with the terminological concepts and the definitions which accompany them together with their partial segmentation. In the theoretical part, historical development and their qualitative and quantitative changes are also discussed. The last topic of the theoretical part is the current role of these intermodal systems in the CzechRepublic. On the basis of expert knowledge, data from discussion with literature and internet resources, the analytical part of the thesis contains the analysis of intermodal terminals and the factors of localization determining their geographical position. This Bachelor Thesis can be considered to be a concept of a complete view of intermodal transport in Europe. The topic of the systems of intermodal transport is really extensive therefore it is not possible to provide a detailed description limited in scope, particularly the analysis of intermodal transport in the whole Europe. The primal emphasis is placed on the comprehensive outline of intermodal systems in Europe and this qualification work is exclusively written from the geographical view.
|
|
| |
guest ::
